Flowing Water Two-Way Sensor Color Stair Light, Motion Sensor, LED Controller, 1

Flowing Water Two-Way Sensor Color Stair Light, Motion Sensor, LED Controller, 12V, Flexible Light Strip, PIR Sensor Stair Light. Flowing Water 2-Way Sensor Stair LED Light: 16.4FT flexible LED light strip and LED staircase controller with two PIR motion sensors, 12V5A DC adapter, two power cables come out of the adapter: red is VCC, black is GND. Light strip 4 line cables: red is VCC, green is DAT, blue and white is other GND. Voltage: DC12V, Power: =60w, Length: 16.4FT, Dots: 100(100 dots/16.4FT), Total pixels: 010-800(up to 131FT light belt can be connected), Sensor: human body pyroelectric infrared PIR motion sensor. Speed Setting: The controller panel has 4 keys and a 4-digit digital tube display screen.

In the initial state of startup, the digital tube displays XX-L. XX represent the running speed of the flowing lights. You can press "-" or "+" keys to adjust the running speed of the light bar. 01-99, 01 is the fastest, 99 is the slowest. Length Setting: The number of light dots is adjustable.

Press the "SET" key to enter the setting parameter state LXXX of the length of the water flow lamp belt. XXX represents the total number of pixels i. The length of the water flow lamp belt. You can press "-" or "+" keys to adjust the length of the light bar. 010-800, 010 is the shortest, 800 is the longest.

This product is 16.4FT light strip, which should be set to 100. Programs Setting: Press the "SET" key to enter the next parameter setting P-XX, which is program setting. You can press "-" or "+" keys to adjust the program effect of the slide light. At present, there are 56 programs. The product introduction provides detailed description.

Other Settings: Display XX-S, is also speed setting. Display EXXX, "-" or "+" adjust light effect residence time, 001 is the shortest and 999 is the longest, maximum 450 seconds. After setting all, press "SET", the digital display return to XX-L, all settings will be saved, next time, the controller will work according to this setting. After the parameter setting is completed, be sure to press "SET" key until XX-L is displayed, otherwise the setting cannot be saved. PIR human motion sensors need to be installed at the entrance and exit of the stairs and face the human body.

The product is low voltage 12V, need to connect transformer. Do not directly connect 110V, it will burn the controller, connect DC Adapter. The positive and negative poles of the controller power input cannot be reversed. The product is not waterproof. CANRIA Flowing Water Two-Way Sensor Color Stair Light, Motion Sensor, LED Controller, 12V, Flexible Light Strip, PIR Sensor Stair Light. Dots: 100 (100 dots / 16.4feet). Total pixels: 010-800 (Up to 131 feet light belt can be connected). Sensor: Human body pyroelectric infrared PIR motion sensor. 16.4FT Flexible LED light strip and LED staircase controller with two PIR motion sensors. 12V5A DC adapter, DC adapter two power cables come out of the adapter: Red wire is VCC, Black wire is GND. Light Strip 4 line cables: Red wire is VCC, Green wire is DAT, Blue and White wire is other GND. The number of light dots is adjustable, the function setting of the sensor controller is selected by the button, and the setting is displayed by the 4-digit digital tube. The "X" in the following description represents a number. The controller panel has 4 keys and a 4-digit digital tube display screen. Press the "SET" key to enter the next parameter setting P-XX, which is program setting. The program list is as follows. 01-07: Single point monochromatic transition (running water).

01 White, 02 Red, 03 Blue, 04 Green, 05 Purple, 06 Yellow, 07 Cyan. (the actual color order shall prevail).

08: 01-07 program effect seven color cycle. (In this mode, each sensing color is different). 09-15: Single point meteor with long tail, 09 White, 10 Red, 11 Blue, 12 Green, 13 Purple, 14 Yellow, 15 Cyan. 16: 09-15 program effect seven color cycle.

17-23: Single point meteor with short tail, 17 White, 18 Red, 19 Blue, 20 Green, 21 Purple, 22 Yellow, 23 Cyan. 24: 17-23 program effect seven color cycle.

25-31: Single point monochromatic transition (running water) of slightly bright background color. When there is no induction, the slightly bright. When there is no induction, the slightly bright background color is keep the light on. 25 White, 26 Red, 27 Blue, 28 Green, 29 Purple, 30 Yellow, 31 Cyan. 32: 25-31 program effect seven color cycle.

33-39: Overall monochrome on and out (slow). 33 White, 34 Red, 35 Blue, 36 Green, 37 Purple, 38 Yellow, 39 Cyan. 40: 33-39 program effect seven color cycle.

41-47: Overall monochrome on and out (fast). 41 White, 42 Red, 43 Blue, 44 Green, 45 Purple, 46 Yellow, 47 Cyan. 48: 41-47 program effect seven color cycle. 49-55: Single point monochromatic transition (running water) of slightly bright background color. When there is no induction, Lights out. 49 White, 50 Red, 51 Blue, 52 Green, 53 Purple, 54 Yellow, 55 Cyan. 56: 49-55 program effect seven color cycle. Press "SET" key to enter the next parameter setting XX-S, which is also the speed setting. Press the Button "SET" display EXXX, press the Button "-" or "+" adjust Light Strip Effect residence time. 001-999, 001 is the shortest and 999 is the longest. After setting all parameters, press "SET" key for the last time, and the digital display screen will return to XX-L, at this time, all parameter settings will be automatically saved to the control system, and the controller will work according to the newly set parameters next time. After the parameter setting is completed, be sure to press "SET" key until XX-L is displayed on the digital display screen, otherwise the setting cannot be saved. PIR Human Motion sensors need to be installed at the entrance and exit of the stairs and face the human body. Do not directly connect 110V, it will burn the controller. 16.4FT Flexible LED light strip.

DC power pigtails cable (DC female plug). 12.76 x 10.51 x 1.85 inches. Product Dimensions: 10.51 inches x 12.76 inches x 1.85 inches. Welcome to our eCommerce shop.

We're dedicated to providing you with high-quality products at unbeatable prices. We're proud to serve you and bring a smile to your face with our top-notch service and products. We are always working hard to ensure your package arrives as soon as possible. In most cases, your package will arrive before due time as it is a high priority for us. If there are any unexpected delays, please let us know and we will take care of it immediately. We are committed to your happiness. This item is in the category "Home & Garden\Lamps, Lighting & Ceiling Fans\String Lights, Fairy Lights". The seller is "barrorz09" and is located in this country: US. This item can be shipped to United States.

Light Source Type: LED
Part Number: -T-1OOON-PARENT
Style: 摩登
Material: 硅胶
Number of Lights: 100
Power Source: Corded Electric
Color: Multicolor
Number of Light Sources: 100
Type of Bulb: LED
Batteries Required?: No
Package Dimensions: 12.76 x 10.51 x 1.85 inches
Item Weight: 1.85 pounds
Batteries Included?: No
Occasion: Christmas
Special Features: Color Changing
Special Feature: Color Changing
Wattage: 60 watts
UPC: 7445035527567
EAN: 07445035527567